Remote control commands
R&S
®
RTE
1227User Manual 1326.1032.02 ─ 20
18.10.3 Mathematics
CALCulate:MATH<m>[:EXPRession][:DEFine]................................................................1227
CALCulate:MATH<m>:STATe........................................................................................ 1227
CALCulate:MATH<m>:ENVSelection............................................................................. 1227
CALCulate:MATH<m>:ARIThmetics...............................................................................1228
CALCulate:MATH<m>:VERTical:OFFSet........................................................................1229
CALCulate:MATH<m>:VERTical:RANGe........................................................................1229
CALCulate:MATH<m>:VERTical:SCALe.........................................................................1229
CALCulate:MATH<m>:DATA:STYPe?............................................................................ 1230
CALCulate:MATH<m>:DATA:HEADer?...........................................................................1230
CALCulate:MATH<m>:DATA[:VALues]?..........................................................................1231
CALCulate:MATH<m>[:EXPRession][:DEFine] <RemComplExpr>
Defines the math expression to be calculated for the specified math channel.
For an overview of corresponding expressions for the available keys in the formula edi-
tor, see Chapter 7.3.4, "Advanced", on page 301.
Suffix:
<m>
.
1..8
Selects the math waveform.
Parameters:
<RemComplExpr> String with regular expression for calculation
Example:
CALC:MATH 'Ch1Wfm1*Ch2Wfm1'
Defines the multiplication of waveforms Ch1Wfm1 and
Ch2Wfm1.
Usage: Asynchronous command
CALCulate:MATH<m>:STATe <State>
Enables the math waveform display.
Suffix:
<m>
.
1..8
math waveform
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
CALCulate:MATH<m>:ENVSelection <EnvelopeCurve>
Selects the upper or lower part of the waveform for mathematic calculation, or a combi-
nation of both.
Waveform analysis