Acquisition and waveform setup
R&S
®
RTE
222User Manual 1326.1032.02 ─ 20
Part number
Displays the material number of the probe.
Remote command:
ZVC:Z<m>:ID:PARTnumber? on page 1153
5.6.1.3 Power calculation
Access: "Vertical" menu > "ZVC Multi-Channel Probe" > "Power Calculation" tab
State
Enables the corresponding channel of the probe. The number of available channels
depend on the characteristics of your multi-channel power probe.
Remote command:
ZVC:Z<m>:V<n>[:STATe] on page 1153
ZVC:Z<m>:I<n>[:STATe] on page 1150
Measurement Impedance
Sets the impedance of the probe channel for power calculations and measurements.
Remote command:
ZVC:Z<m>:V<n>:IMPedance on page 1151
ZVC:Z<m>:I<n>:IMPedance on page 1145
5.6.1.4 Zero compensation
Access: "Vertical" menu > "ZVC Multi-Channel Probe" > "ZeroComp" tab
R&S
RT-ZVC probe
To Next Page
Loading...
