Remote control commands
R&S
®
RTE
1153User Manual 1326.1032.02 ─ 20
ZVC:Z<m>:V<n>:SKEW <DeskewOffset>
Sets the skew offset value for the voltage probe channel. This is a delay value, that is
known from the circuit specifics but cannot be compensated by the instrument auto-
matically.
Suffix:
<m>
.
1..2
<n> 1..4
Parameters:
<DeskewOffset> Range: -6E-6 to 6E-6
Increment: 200E-9
*RST: 0
Default unit: s
Usage: Asynchronous command
ZVC:Z<m>:V<n>[:STATe] <State>
Enables the corresponding voltage channel of the probe.
Suffix:
<m>
.
1..2
<n> 1..4
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
ZVC:Z<m>:ID:NAME?
Queries the name of the probe.
Suffix:
<m>
.
1..2
Return values:
<Name>
Usage: Query only
Asynchronous command
ZVC:Z<m>:ID:PARTnumber?
Queries the R&S part number of the probe.
Suffix:
<m>
.
1..2
Acquisition and setup
To Next Page
Loading...
