Rohde & Schwarz RTE - Page 1154

Remote control commands
R&S
®
RTE
1154User Manual 1326.1032.02 ─ 20
Return values:
<PartNumber>
Usage: Query only
Asynchronous command
ZVC:Z<m>:ID:SRNumber?
Queries the serial number of the probe.
Suffix:
<m>
.
1..2
Return values:
<SerialNo>
Usage: Query only
Asynchronous command
ZVC:Z<m>:ID:SWVersion?
Queries the version of the probe firmware.
Suffix:
<m>
.
1..2
Return values:
<Softwareversion>
Usage: Query only
Asynchronous command
ZVC:Z<m>:I<n>:ZERComp:DETect
Measures the zero offset, the mean value on a currentless DUT. If temperature
changes, or if you change the shunt or other probe settings, repeat the measurement.
Suffix:
<m>
.
1..2
<n> 1..4
Usage: Event
Asynchronous command
ZVC:Z<m>:I<n>:ZERComp:USE <UseZeroComp>
Enables the automatic compensation of the measured zero offset.
Suffix:
<m>
.
1..2
<n> 1..4
Acquisition and setup