Rohde & Schwarz RTE - Release Notes, Open Source Acknowledgment; Application Notes, Application Cards, Videos; Options Described in this Document

Preface
R&S
®
RTE
50User Manual 1326.1032.02 ─ 20
2.2.3 Release notes, open source acknowledgment
The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation. The open source acknowledg-
ment document provides verbatim license texts of the used open source software. It
can also be read directly on the instrument.
See www.rohde-schwarz.com/firmware/rte.
2.2.4 Application notes, application cards, videos
These documents deal with special applications or background information on particu-
lar topics.
See www.rohde-schwarz.com/application/rte and Oscilloscopes Application Videos -
Media Center
2.3 Options Described in this Document
In addition to the base unit, the following options are described in this documentation:
Type Designation Order No. for
1326.2000.xx /
1317.2500.xx instru-
ments
R&S RTE-B1 MSO 1317.4961.02
R&S RTE-B6 Waveform and pattern generator 1326.3012.02 / n.a.
R&S RTE-K1 I²C and SPI serial triggering and decoding 1326.1178.02 /
1317.7125.02
R&S RTE-K2 UART/RS-232/RS-422/RS-485 serial triggering and
decoding
1326.1184.02 /
1317.7131.02
R&S RTE-K3 CAN and LIN serial triggering and decoding 1326.1190.02 /
1317.7148.02
R&S RTE-K4
FlexRay
TM
serial triggering and decoding
1326.1203.02 /
1317.7154.02
R&S RTE-K5 I²S (audio) serial triggering and decoding 1326.1210.02 /
1317.7160.02
R&S RTE-K6 MIL-STD-1553 serial triggering and decoding 1326.1226.02 /
1325.9781.02
R&S RTE-K7 ARINC 429 serial triggering and decoding 1326.1232.02 /
1325.9798.02
R&S RTE-K8 Ethernet serial triggering and decoding 1326.1332.02 /
1317.7402.02
R&S RTE-K9 CAN-FD serial triggering and decoding 1326.1249.02 /
1325.9898.02
Options Described in this Document