Data and file management
R&S
®
RTE
477User Manual 1326.1032.02 ─ 20
Tap "Save As" to save the settings to a different file. Select the file and directory
from the file selection dialog box.
The current settings and the active reference waveforms are saved to the selected
file.
To load a One File
1. Press the [FILE] key.
2. Press the "One File" button.
3. Tap "Load" to load the settings from the specified file.
Tap "Open" to navigate to a different file. Select the file from the file selection dialog
box and tap "Select".
The saved settings and reference waveforms are loaded to the R&S RTE.
12.2 Waveform data and results
Access: [FILE] > "Save" tab
Waveform data and results
To Next Page
Loading...
