Data and file management
R&S
®
RTE
472User Manual 1326.1032.02 ─ 20
12.1.1.1 Save saveset settings
Access: [FILE] key > "Save" tab > "Savesets"
Save to file
Enter the file name to save the setting data to, and select the file format with the format
button on the right. Double-tap the file name to open the file selection dialog box. See
also: Chapter 12.7, "File selection dialog", on page 511.
By default, saveset file names have the prefix "Settings_".
"Save"
Saves the data to the selected file.
"Save As..."
Opens the file selection dialog box and saves the data to the selected
file.
".dfl/.xml"
Selects the file format.
Remote command:
MMEMory:SAV on page 1396
12.1.1.2 Load saveset settings
Access: [FILE] key > "Recall" tab > "Savesets"
Save and recall user settings
To Next Page
Loading...
