Rohde & Schwarz RTE - Waveform Data Export to File; Waveform Data Transmission

Remote control commands
R&S
®
RTE
1399User Manual 1326.1032.02 ─ 20
●
Drive letter of the USB flash drive, for example, "E:\" or "F:\" if a USB flash
drive is connected.
Parameters:
<Path> String parameter
MMEMory:AUTonaming:RESPath
Resets the path for file operations to the factory default path.
Usage: Event
MMEMory:AUTonaming:RESall
Resets all autonaming settings to the default value, including the path.
Usage:
Event
18.16.4 Waveform data transmission
The R&S RTE provides specific data export commands for the various waveform
types. The commands transmit the data of the waveform points from the instrument to
the controlling computer. The data can be used in MATLAB, for example.
The commands are described in the relevant chapters:
●
Analog waveforms: Chapter 18.8.6, "Waveform data", on page 1121
●
Reference waveforms: Chapter 18.10.2.3, "Waveform data export", on page 1224
●
Math waveforms: Chapter 18.10.3, "Mathematics", on page 1227
●
Spectrum waveforms: Chapter 18.13.2, "Waveform data", on page 1328
●
Logic channels: Chapter 18.18.5, "MSO data", on page 1921
18.16.5 Waveform data export to file
The resulting files of waveforms exports are described in Chapter 12.2.1, "Waveform
export files", on page 478.
The export settings for manual operation are explained in Chapter 12.2.2, "Waveforms
- export settings", on page 485.
EXPort:WAVeform:SOURce.......................................................................................... 1400
EXPort:WAVeform:MULTichannel...................................................................................1402
CHANnel<m>:EXPortstate............................................................................................ 1402
EXPort:WAVeform:NAME..............................................................................................1402
EXPort:WAVeform:SAVE...............................................................................................1403
EXPort:WAVeform:SCOPe............................................................................................1403
EXPort:WAVeform:STARt..............................................................................................1404
EXPort:WAVeform:STOP.............................................................................................. 1404
EXPort:WAVeform:ZOOM............................................................................................. 1404
EXPort:WAVeform:CURSorset.......................................................................................1404
Data management