Rohde & Schwarz RTE - AM Modulation

Waveform generator (Option R&S RTE-B6)
R&S
®
RTE
932User Manual 1326.1032.02 ─ 20
Remote command:
WGENerator<m>:MODulation:CARRier:PERiod on page 1928
15.1.3.2 AM modulation
For amplitude modulation (AM), the amplitude of the carrier signal is varied according
to the modulation signal.
Modulation signal
Selects the type of the modulation signal for the AM modulation types.
Remote command:
WGENerator<m>:MODulation:AM[:FUNCtion] on page 1928
Modulation freq
Sets the frequency of the modulation waveform.
Remote command:
WGENerator<m>:MODulation:AM:FREQuency on page 1927
Modulation depth
Sets the modulation depth, the percentage of the amplitude range that is used for the
modulation.
Remote command:
WGENerator<m>:MODulation:AM:DEPTh on page 1927
Setup of the waveform generator