Rohde & Schwarz RTE - Search Settings

Remote control commands
R&S
®
RTE
1509User Manual 1326.1032.02 ─ 20
Return values:
<State> OK | ERRor | UNDF
UNDF: Undefined
*RST: OK
Usage: Query only
BUS<m>:CAN:FRAMe<n>:BYTE<o>:VALue?
Returns the value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<Value> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 255
*RST: 0
Usage: Query only
18.17.6.4 Search settings
SEARch:TRIGger:CAN[:SSOFrame]..............................................................................1510
SEARch:TRIGger:CAN:SFTYpe.................................................................................... 1510
SEARch:TRIGger:CAN:SFIDentifier...............................................................................1510
SEARch:TRIGger:CAN:SIDData....................................................................................1510
SEARch:TRIGger:CAN:SERRor.................................................................................... 1511
SEARch:TRIGger:CAN:FDATa:STANdard.......................................................................1511
SEARch:TRIGger:CAN:FTYPe...................................................................................... 1511
SEARch:TRIGger:CAN:ITYPe.......................................................................................1512
SEARch:TRIGger:CAN:ICONdition................................................................................ 1512
SEARch:TRIGger:CAN:IMAX........................................................................................ 1512
SEARch:TRIGger:CAN:IMIN......................................................................................... 1513
SEARch:TRIGger:CAN:DCONdition...............................................................................1513
SEARch:TRIGger:CAN:DMIN........................................................................................1513
SEARch:TRIGger:CAN:DMAX.......................................................................................1514
SEARch:TRIGger:CAN:DLCCondition............................................................................1514
SEARch:TRIGger:CAN:DLC..........................................................................................1514
SEARch:RESult:CAN:FRAMe<m>:NDBYtes?.................................................................1514
SEARch:TRIGger:CAN:FDATa:DPOPerator....................................................................1515
SEARch:TRIGger:CAN:FDATa:DPOSition...................................................................... 1515
Protocols