Rohde & Schwarz RTE - Page 1511

Remote control commands
R&S
®
RTE
1511User Manual 1326.1032.02 ─ 20
Parameters:
<IdentifierData> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SERRor <SearchName>,<ErrorCondition>
SEARch:TRIGger:CAN:SERRor? <SearchName>
Enables the search for a specified error.
Parameters:
<ErrorCondition> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:FDATa:STANdard <SearchName>,<Standard>
SEARch:TRIGger:CAN:FDATa:STANdard? <SearchName>
Selects the CAN standard: CAN, CAN FD, or Any.
Use "Any" to search on either CAN or CAN-FD frame. In this case, the search configu-
ration provides all possible settings, for CAN as well as for CAN FD.
The setting is available in CAN FD option R&S RTE-K9.
Parameters:
<Standard> ANY | CAN | CANFd
*RST: CAN
Parameters for setting and query:
<SearchName> String with the search name
SEARch:TRIGger:CAN:FTYPe <SearchName>,<FrameType>
SEARch:TRIGger:CAN:FTYPe? <SearchName>
Selects the CAN frame type to be searched for.
For data and remote frames, the identifier format has to be set with SEARch:
TRIGger:CAN:ITYPe on page 1512.
Parameters:
<FrameType> ANY | DATA | REMote | ERRor | OVERload
*RST: ANY
Parameters for setting and query:
<SearchName>
Protocols