Rohde & Schwarz RTE - Page 1510

Remote control commands
R&S
®
RTE
1510User Manual 1326.1032.02 ─ 20
SEARch:TRIGger:CAN:FDATa:DPTO.............................................................................1516
SEARch:TRIGger:CAN:ACKerror...................................................................................1516
SEARch:TRIGger:CAN:BITSterror................................................................................. 1516
SEARch:TRIGger:CAN:CRCerror.................................................................................. 1516
SEARch:TRIGger:CAN:FORMerror................................................................................1517
SEARch:TRIGger:CAN:FDATa:SCERror.........................................................................1517
SEARch:TRIGger:CAN:FDATa[:FDF]............................................................................. 1517
SEARch:TRIGger:CAN:FDATa:BRS...............................................................................1517
SEARch:TRIGger:CAN:FDATa:ESI................................................................................ 1518
SEARch:TRIGger:CAN[:SSOFrame] <SearchName>,<FrameStart>
SEARch:TRIGger:CAN[:SSOFrame]? <SearchName>
Enables the search for a start of frame.
Parameters:
<FrameStart> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SFTYpe <SearchName>,<FrameType>
SEARch:TRIGger:CAN:SFTYpe? <SearchName>
Enables the search for a specified frame type.
Parameters:
<FrameType> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SFIDentifier <SearchName>,<Identifier>
SEARch:TRIGger:CAN:SFIDentifier? <SearchName>
Enables the search for frame indentifier.
Parameters:
<Identifier> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:SIDData <SearchName>,<IdentifierData>
SEARch:TRIGger:CAN:SIDData? <SearchName>
Enables the search for identifier and data.
Protocols