Mixed signal option (MSO, R&S RTE-B1)
R&S
®
RTE
905User Manual 1326.1032.02 ─ 20
Logic probes provided by R&S are recognized by the instrument. The fields show the
characteristics of each recognized probe (pod) for information. "Write EEPROM" and
"Flash it" are service functions.
14.1.3 Digital resolution
Access: [RES REC LEN] key
If an MSO option is installed and at least one digital channel is active, additional infor-
mation appears on the "Setup" tab of the "Horizontal" dialog box.
Dig. resolution
Shows the current digital resolution of the digital channels. The maximum digital record
length is always 200 MSa per digital channel. This number is independent of additional
installed memory.
Remote command:
ACQuire:DRESolution? on page 1910
Digital channels and parallel buses
To Next Page
Loading...
