Rohde & Schwarz RTE - Arb; Sweep

Remote control commands
R&S
®
RTE
1932User Manual 1326.1032.02 ─ 20
18.19.1.4 Sweep
WGENerator<m>:SWEep:FSTart...................................................................................1932
WGENerator<m>:SWEep:TIME.....................................................................................1932
WGENerator<m>:SWEep[:FEND]..................................................................................1932
WGENerator<m>:SWEep:FSTart <StartFrequency>
Sets the start frequency of the sweep range.
Suffix:
<m>
.
1..2
Parameters:
<StartFrequency> Range: 1E-3 to 100E+6
Increment: 1
*RST: 1000
Default unit: Hz
WGENerator<m>:SWEep:TIME <Time>
Sets the duration of the sweep.
Suffix:
<m>
.
1..2
Parameters:
<Time> Range: 1E-3 to 500
Increment: 1
*RST: 1E-3
Default unit: s
WGENerator<m>:SWEep[:FEND] <StopFrequency>
Sets the stop frequency of the sweep range.
Suffix:
<m>
.
1..2
Parameters:
<StopFrequency> Range: 1E-3 to 100E+6
Increment: 1
*RST: 1E+6
Default unit: Hz
18.19.1.5 ARB
WGENerator<m>:ARBGen:COPY................................................................................. 1933
WGENerator<m>:ARBGen:MULTichannel:IMPort............................................................1933
WGENerator<m>:ARBGen:MULTichannel:NAME............................................................1933
WGENerator<m>:ARBGen:MULTichannel:OPEN............................................................1934
Waveform generator (option R&S
RTE-B6)