Rohde & Schwarz RTE - Flexray (Option R&S RTE-K4); LIN Search Results

Protocol analysis
R&S
®
RTE
617User Manual 1326.1032.02 ─ 20
13.6.6.2 LIN search results
To get search results, "Enable" the search. You can minimize, shift or close the search
dialog.
The search results are listed in the search result table and marked in the waveform by
blue lines.
The "Show search zoom windows" function allows you to analyze the search results in
more detail. Search zoom and result table are synchronized; if you select a row in the
result table, this result is shown in the search zoom.
For an introduction to search results, see:
●
Chapter 11.1.2, "Search results", on page 446
●
Chapter 11.4, "Result presentation", on page 463
Remote commands:
●
SEARch:RESult:LIN:FCOunt? on page 1553
●
SEARch:RESult:LIN:FRAMe<m>:STATus? on page 1553
●
SEARch:RESult:LIN:FRAMe<m>:STARt? on page 1553
●
SEARch:RESult:LIN:FRAMe<m>:STOP? on page 1553
●
SEARch:RESult:LIN:FRAMe<m>:DATA? on page 1554
●
SEARch:RESult:LIN:FRAMe<m>:SDATa? on page 1554
●
SEARch:RESult:LIN:FRAMe<m>:SDEXport? on page 1554
●
SEARch:RESult:LIN:FRAMe<m>:CSSTate? on page 1555
●
SEARch:RESult:LIN:FRAMe<m>:CSValue? on page 1555
●
SEARch:RESult:LIN:FRAMe<m>:IDSTate? on page 1555
●
SEARch:RESult:LIN:FRAMe<m>:IDValue? on page 1556
●
SEARch:RESult:LIN:FRAMe<m>:IDPValue? on page 1556
●
SEARch:RESult:LIN:FRAMe<m>:SYMBol? on page 1556
●
SEARch:RESult:LIN:FRAMe<m>:SYSTate? on page 1557
●
SEARch:RESult:LIN:FRAMe<m>:VERSion? on page 1557
●
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:STATe? on page 1557
●
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:VALue? on page 1557
13.7 FlexRay (option R&S RTE-K4)
FlexRay is designed for use in safety-related distributed applications in the automotive
industry. It is applied in real-time applications when higher data rates and reliable com-
munication are required. In particular, FlexRay supports x-by-wire applications, for
example, steer-by-wire or brake-by-wire.
FlexRay (option R&S
RTE-K4)