Rohde & Schwarz RTE - CAN (Option R&S RTE-K3;K9)

Remote control commands
R&S
®
RTE
1487User Manual 1326.1032.02 ─ 20
BUS<m>:UART:WORD<n>:STARt?
Returns the start time of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<WordStart> Range: -100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:UART:WORD<n>:STATe?
Returns the status of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<WordState> OK | FRSTart | FRENd | FRME | BREak | STERror | SPERror |
PRERror | INSufficient
OK: the frame is valid.
BREak:stop bit error with 0x00 word
STERror: StarT ERror, incorrect start bit
SPERror: StoP ERror, incorrect stop bit
PRERror:PaRity ERror, incorrect parity bit.
INSufficient: The frame is not completely contained in the acqui-
sition. The acquired part of the frame is valid.
*RST: OK
Usage: Query only
18.17.6 CAN (option R&S RTE-K3/K9)
● Configuration.......................................................................................................1488
● Trigger.................................................................................................................1492
● Decode results.................................................................................................... 1500
● Search settings................................................................................................... 1509
● Search results..................................................................................................... 1518
● Symbolic trigger, decode and search..................................................................1524
Protocols