Protocol analysis
R&S
®
RTE
785User Manual 1326.1032.02 ─ 20
Note: To see more than the three selected results, bring up a full list of the states and
values of all cells by activating "Show details" in the decode table dialog. For an exam-
ple, see Figure 13-85.
Remote command:
BUS<m>:CMSB:FRAMe<n>:CELL<o>:CLMN on page 1746
Open or Save XML File
For efficient working and for convenient exchange of frame descriptions, they can both
be loaded ("Open") or saved ("Save" / "Save As...") in XML file format. "Explore..."
opens the SaveXML folder, which is the "Default Path" for saving frame descriptions.
Remote command:
BUS<m>:CMSB:LOAD on page 1747
BUS<m>:CMSB:SAVE on page 1747
13.14.2.3 XML syntax
This chapter explains the required grammar and syntax of XML files, which contain cus-
tom frames and can be loaded or saved. Below is a typical example of such an XML
file:
Figure 13-80: Example of XML file syntax with three custom frame format descriptions
The first out of three XML frames in Figure 13-80 is interpreted by the software in the
following way:
Figure 13-81: Example of one custom frame format description for the MVB protocol
A suitable XML file as shown in Figure 13-80 is composed as follows:
Header:
Custom: Manchester / NRZ (option R&S
RTE-K50)M
To Next Page
Loading...
