Rohde & Schwarz RTE - Report

Remote control commands
R&S
®
RTE
1945User Manual 1326.1032.02 ─ 20
Usage: Event
POWer:DESKew:EXECute
Starts the auto deskew.
Usage: Event
POWer:DESKew:RESet <OverwriteCurrSkew>
Overwrites the present skew setup.
Parameters:
<OverwriteCurrSkew>ON | OFF
*RST: ON
POWer:DESKew:TIME?
Queries the result of the auto deskew.
Return values:
<AutoDeskewOffs> Range: -100E-9 to 100E-9
*RST: 0
Default unit: s
Usage: Query only
POWer:DESKew:UDPReset <UsrDefinedPreset>
Activates or deactivates a user defined setup. If ON, the instrument setup including
probe setup and the deskew values are written to a user defined preset file (saveset)
that can be loaded using MMEMory:RCL on page 1396.
The default path is:
C:\Users\Public\Documents\Rohde-Schwarz\RTE\SaveSets\
Parameters:
<UsrDefinedPreset> ON | OFF
*RST: ON
18.20.3 Report
POWer:REPort:CONTent:HSETup.................................................................................1946
POWer:REPort:CONTent:MSETup.................................................................................1946
POWer:REPort:CONTent:MSIGnal.................................................................................1946
POWer:REPort:CONTent:RESU.................................................................................... 1946
POWer:REPort:CONTent:SETTings............................................................................... 1946
POWer:REPort:CONTent:TSETup................................................................................. 1946
POWer:REPort:CONTent:VSETup................................................................................. 1946
Power analysis (option R&S
RTE-K31)