Rohde & Schwarz RTE - Options in Beta State

Instrument setup
R&S
®
RTE
165User Manual 1326.1032.02 ─ 20
2. If you received a key in written form, enter the key in the "Enter new option key"
field.
If you received a key in digital form as a file, tap "Open", navigate to the directory
that contains the file, and select the option key file.
3. If you want to activate several options, repeat the previous step for each option.
4. Restart the instrument or the firmware.
See also: Chapter 4.9.1, "SW options", on page 161
4.9.4 Options in beta state
Options may be released in beta state. These options require a license key and an
additional activation.
To activate a beta option:
1. On the "File" menu, select "Mode".
2. Select the "Operation Mode" tab.
3. Enable "Enable options in beta state".
The activation is effective immediately until the next shut-down of the firmware.
Options