Rohde & Schwarz RTE - PTT and CSV Files for CAN; CAN FD

Protocol analysis
R&S
®
RTE
579User Manual 1326.1032.02 ─ 20
The usage of DBC files is described in Chapter 13.5.7, "Symbolic trigger, decode and
search", on page 593.
13.5.4.2 PTT and CSV files for CAN / CAN FD
Label list files are protocol-specific. A PTT label file for CAN protocols contains three
values for each identifier:
●
Identifier type, 11-bit or 29-bit long
●
Identifier value
●
Label, symbolic name of the identifier, specifying its function in the bus network.
Example: CAN PTT file
# ----------------------------------------------------------------------------
@FILE_VERSION = 1.00
@PROTOCOL_NAME = can
# ---------------------------------------------------------------------------
# Labels for CAN protocol
# Column order: Identifier type, Identifier value, Label
# ---------------------------------------------------------------------------
11,064h,Diag_Response
11,1E5h,EngineData
11,0A2h,Ignition_Info
11,1BCh,TP_Console
11,333h,ABSdata
11,313h,Door_Left
11,314h,Door_Right
CAN and CAN FD (option R&S
RTE-K3/K9)