Rohde & Schwarz RTE - MSO Data

Remote control commands
R&S
®
RTE
1921User Manual 1326.1032.02 ─ 20
18.18.5 MSO data
To export data of digital channels and parallel buses to file, use the following com-
mands:
●
EXPort:WAVeform:SOURce on page 1400
●
EXPort:WAVeform:NAME on page 1402
●
EXPort:WAVeform:SAVE on page 1403
The remote data transfer from the instrument to the controlling computer is performed
using the following commands:
DIGital<m>:DATA:HEADer?.......................................................................................... 1921
DIGital<m>:DATA[:VALues]?......................................................................................... 1921
BUS<m>:PARallel:DATA:FORMat..................................................................................1922
BUS<m>:PARallel:DATA:HEADer?................................................................................ 1922
BUS<m>:PARallel:DATA[:VALues]?............................................................................... 1922
DIGital<m>:DATA:HEADer?
Returns the header of digital channel data
Table 18-13: Header data
Position Meaning Example
1 XStart, acquisition time before trigger, in s -5E-008 = - 50 ns
2 XStop, acquisition time after trigger, in s 5E-008 = 50 ns
3 Record length of the waveform in Samples 1000
4 Number of values per sample interval. For digital
data the result is 1.
1
Suffix:
<m>
.
0..15
Number of the digital channel
Usage: Query only
DIGital<m>:DATA[:VALues]?
Returns the data of the indicated digital channel for transmission from the instrument to
the controlling computer. The data can be used in MATLAB, for example.
Suffix:
<m>
.
0..15
Selects the digital channel.
Return values:
<Data> List of data (0 and 1)
Usage: Query only
Mixed signal option (MSO, R&S RTE-B1)