Search functions
R&S
®
RTE
454User Manual 1326.1032.02 ─ 20
Vertical condition
Defines the run of the signal relative to the window, see "Vertical condition"
on page 249.
Remote command:
SEARch:TRIGger:WINDow:RANGe on page 1367
Time condition, Width, ±Delta
Set the time limit for the vertical condition, see:
●
"Time condition" on page 249
●
"Width" on page 250
●
"±Delta" on page 250
Remote command:
SEARch:TRIGger:WINDow:TIMerange on page 1368
SEARch:TRIGger:WINDow:WIDTh on page 1368
SEARch:TRIGger:WINDow:DELTa on page 1367
Upper level, Lower level
Set the upper and lower voltage thresholds. The amplitude of a runt crosses the first
threshold twice in succession without crossing the second one.
Remote command:
SEARch:TRIGger:LEVel:WINDow:UPPer on page 1369
SEARch:TRIGger:LEVel:WINDow:LOWer on page 1369
11.2.2.6 Timeout
The timeout search settings are the same as the timeout trigger settings. To apply the
trigger settings to search, tap Copy 'A Trigger'.
Range, Time
Set the timeout condition, see:
●
"Range" on page 250
●
"Time" on page 251
Remote command:
SEARch:TRIGger:TIMeout:RANGe on page 1364
SEARch:TRIGger:TIMeout:TIME on page 1364
Search setup
To Next Page
Loading...
