Search functions
R&S
®
RTE
446User Manual 1326.1032.02 ─ 20
●
Result presentation
For each search, you define how the search results are displayed: in a result table
and/or in a search zoom window.
●
Noise rejection
Hysteresis for the selected source is defined for each search separately, in abso-
lute or relative values.
Noise rejection is not available for searches on serial buses.
Remote commands:
●
SEARch:ADD on page 1352
●
SEARch:REMove on page 1352
11.1.2 Search results
The results are displayed in a "Search Results" box and optionally in a zoom window.
Search Results box
The results of each search are tabulated in a "Search Results" box.
If you search for several event types in parallel, the results are presented in several
tabs - one for each search event and one for the combined results. Each tab contains a
table with the position and, if available, further parameters for each result. The tables
row can be sorted, and you can define a maximum number of table entries in the
"Result Presentation" dialog box. As with all result boxes, you can minimize it, display it
like a diagram, and define the default position.
If "Auto clear" is enabled in the "Result Presentation" dialog box, the instrument dis-
plays the search results of the last acquisition. If "Auto clear" is disabled, the first result
of each acquisition is listed until the maximum number of entries in the table is
reached.
Remote commands for result query:
●
SEARch:RESult[:ALL]? on page 1389
Search zoom windows
Search zoom windows allow you to analyze the search results in more detail. By
default, the zoom is displayed for the selected search result. The zoom area is indica-
ted in the diagram that displays the source waveform of the search.
Overview: search definition and results
To Next Page
Loading...
