Rohde & Schwarz RTE - Waveform Labels

Instrument setup
R&S
®
RTE
150User Manual 1326.1032.02 ─ 20
Show evaluation gate(s) in zoom
If enabled, the available histogram areas, masks, and measurement gates are shown
in the zoom diagrams. If the evaluation gate is within the zoom area, the display helps
to move or modify the evaluation gates in the zoom window.
Make sure that the option is disabled if the zoom area and the evaluation gate are of
nearly the same size to avoid conflicts in operation.
Gate symbol transparency
Sets the transparency of the area that is defined as measurement or search gate. The
setting only takes effect if "Show gate" is enabled.
Remote command:
DISPlay:GATE:TRANsparency on page 1099
Search result gate symbol color
Sets the color of the search zoom area. The search zoom area is displayed if "Show
search zoom windows" is enabled.
See also: "Search zoom window" on page 465.
Search result line color
Sets the color of the search result markers. The markers are displayed if "Show search
zoom windows" is enabled.
Result position
Defines where a new result box opens.
Results of automatic and cursor measurement, and also decoding results, have their
own position setting.
"Floating"
The result box opens as a box similar to a dialog box in front of the
diagrams. It can be moved and shows all results.
"Preview"
The result box opens as a minimized result icon on the signal bar. It
shows only two columns and a few rows of the results.
Remote command:
DISPlay:RESultboxes:DEFaultpos on page 1099
4.4.2.4 Waveform labels
Access: [DISPLAY] > "Labels" tab
Using labels, you can annotate the waveforms to name or explain each waveform. The
text is shown in the same color as the assigned waveform. Each label has its individual
position. You can enter exact positions in the dialog box, or drag the labels on the
screen to the required position. The position can be a fixed one (relative to the screen),
or a flexible position (absolute, assigned to the axes).
To add labels quickly, you can add the "Label" icon to the toolbar and use it.
Display configuration