Search functions
R&S
®
RTE
465User Manual 1326.1032.02 ─ 20
If "Auto clear" is disabled, the first result of each acquisition is listed until the maximum
number of entries in the table is reached.
Clear results
Clears the search results once and starts a new search.
Remote command:
SEARch:CLEar on page 1352
Search zoom window
The search zoom window allows you to analyze the search results in more detail.
You can change the size and the position of the search zoom area in the same way as
a usual zoom. If you move the zoom area in the source diagram, the nearest search
result is marked in the results table. See also: Chapter 7.1.1, "Methods of zooming",
on page 278
The search zoom area is marked in the waveform diagram. You can change the color
of the area with: "Display" menu > "Diagram layout" > "Search result gate symbol
color" on page 150.
Show search zoom windows ← Search zoom window
If enabled, a zoom window is displayed for the currently selected search result. The
zoom area is indicated in the diagram that displays the source waveform of the search.
Remote command:
SEARch:RESDiagram:SHOW on page 1386
Vertical ← Search zoom window
Defines whether absolute or relative values are used to specify the y-axis values.
Remote command:
LAYout:ZOOM:VERTical:MODE on page 1216
SEARch:RESDiagram:VERT:MODE on page 1386
Position / Relative position (vertical) ← Search zoom window
Defines the y-value of the centerpoint of the zoom area.
Remote command:
LAYout:ZOOM:VERTical:ABSolute:POSition on page 1217
LAYout:ZOOM:VERTical:RELative:POSition on page 1218
SEARch:RESDiagram:VERT:ABSolute:POSition on page 1386
SEARch:RESDiagram:VERT:RELative:POSition on page 1387
Range / Relative Range (horizontal) ← Search zoom window
Defines the height of the zoom area.
Remote command:
LAYout:ZOOM:VERTical:RELative:SPAN on page 1219
LAYout:ZOOM:VERTical:ABSolute:SPAN on page 1217
SEARch:RESDiagram:VERT:ABSolute:SPAN on page 1386
SEARch:RESDiagram:VERT:RELative:SPAN on page 1387
Result presentation
To Next Page
Loading...
