Rohde & Schwarz RTE - Toolbar

Getting started
R&S
®
RTE
117User Manual 1326.1032.02 ─ 20
To change the position of the signal bar
► Touch the "Horizontal" label on the top of the signal bar and drag it to the opposite
side of the screen.
To configure auto-hide
The signal bar can be hidden if the displayed information has not changed for a
defined time, and is displayed again automatically when a setting in the signal bar
changes. The signal bar does not hide entirely, it simply fades and becomes less visi-
ble in the display.
1. Press the [DISPLAY] key on the front panel.
2. In the "Display" dialog box, select the "Diagram Layout" tab.
3. Select "Auto-hide".
4. Define the hiding properties:
● "Hide bar after": the time after which the bar is hidden if no changes occur
● "Hiding transparency": Transparency of the hidden signal bar on a scale from
20% (low transparency) to 70% (high transparency)
● Hide head also: the horizontal and trigger labels are also faded
To change the colors
If you want to highlight the signal bar, you can change the "Fill color" and "Border
color" of the bar.
1. Press the [DISPLAY] key on the front panel.
2. In the "Display" dialog box, select the "Diagram Layout" tab.
3. Tap "Border color" to change the color of the signal bar frame, or "Fill color" to
change the fill color of the bar.
4. In the "Adjust Colors" dialog box, select the color.
5. To use a color that is not yet defined, tap "Userdefined Colors". Define the new
color settings.
To see the effect of a setting change in the "Preview" area, enter the value and
press the [ENTER] key.
6. Tap "OK."
The signal bar is displayed in the new colors.
3.4.7 Toolbar
The toolbar provides direct access to important control and measurement functions. It
shows current date and time, and a message button. The selected function is highligh-
ted.
Operating the instrument