Rohde & Schwarz RTE - Page 1508

Remote control commands
R&S
®
RTE
1508User Manual 1326.1032.02 ─ 20
RESE = Reserved bit error
*RST: NONE
Usage: Query only
BUS<m>:CAN:FRAMe<n>:SDEXport?
Returns the symbolic data of the frame in export format.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<SymbolicData>
Usage: Query only
BUS<m>:CAN:FDATa:FRAMe<n>:SCValue?
Returns the stuff bit count modulo 8 value.
Suffix:
<m>
.
1..4
<n> *
Return values:
<StuffCount> Range: 0 to 7
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:CAN:FRAMe<n>:BYTE<o>:STATe?
Returns the state of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Protocols