Remote control commands
R&S
®
RTE
1610User Manual 1326.1032.02 ─ 20
TRIGger<m>:MILStd:DATA:DCONdition.........................................................................1614
TRIGger<m>:MILStd:DATA:DMAX.................................................................................1615
TRIGger<m>:MILStd:DATA:DMIN..................................................................................1615
TRIGger<m>:MILStd:DATA:ICONdition.......................................................................... 1615
TRIGger<m>:MILStd:DATA:IMAX.................................................................................. 1615
TRIGger<m>:MILStd:DATA:IMIN................................................................................... 1616
TRIGger<m>:MILStd:ERRor:MANChester...................................................................... 1616
TRIGger<m>:MILStd:ERRor:PARity............................................................................... 1616
TRIGger<m>:MILStd:ERRor:SYNC................................................................................1616
TRIGger<m>:MILStd:MAXResponse:BITS......................................................................1616
TRIGger<m>:MILStd:MAXResponse:SELect.................................................................. 1617
TRIGger<m>:MILStd:MINGap:BITS............................................................................... 1617
TRIGger<m>:MILStd:MINGap:SELect............................................................................1617
TRIGger<m>:MILStd:STATus:BCReceived..................................................................... 1617
TRIGger<m>:MILStd:STATus:BUSY.............................................................................. 1618
TRIGger<m>:MILStd:STATus:DBCaccept.......................................................................1618
TRIGger<m>:MILStd:STATus:INSTrument......................................................................1618
TRIGger<m>:MILStd:STATus:MERRor...........................................................................1618
TRIGger<m>:MILStd:STATus:SREQuest........................................................................ 1618
TRIGger<m>:MILStd:STATus:SUBSystem......................................................................1619
TRIGger<m>:MILStd:STATus:TERMinal......................................................................... 1619
TRIGger<m>:MILStd:TPSPecifier.................................................................................. 1619
TRIGger<m>:MILStd:TYPE <Type>
Sets the trigger type for MIL-1553 analysis.
Parameters:
<Type> STYPe | WTYPe | DATA | CDST | CMD | STATword | ERR
STYPe
SyncTYPe: triggers on a sync impulse.
WTYPe
WordTYPe: triggers on the selected word type.
DATA
Triggers on a data word that can be specified.
CDST
CommanDSTatus word: triggers on a command word or on a
status word that can be specified.
CMD
CoMmanD word: triggers on a command word or on a status
word that can be specified.
STATword
STATus word: triggers on a status word that can be specified.
ERR
ERRor: triggers on any combination of protocol errors.
*RST: 
STYPe
Protocols