Instrument setup
R&S
®
RTE
136User Manual 1326.1032.02 ─ 20
"Extend"
The instrument display and the external display show different con-
tent.
"Projector
only"
The instrument's user interface is only shown on the external display,
the instrument display is off.
"Additional dis-
play settings"
Opens the Windows configuration for display settings.
Time, date
Opens the standard Windows "Date and Time Properties" dialog box to set the correct
date and time. Only users with administrator rights can fulfill this task.
Note: Usually date and time are set correctly. To adjust your regional time, select the
correct time zone rather than changing the time.
Remote command:
SYSTem:DATE on page 1086
SYSTem:TIME? on page 1086
Log on as
Sets the user that is automatically logged on during the startup process of the instru-
ment. The change of this setting takes effect at the next instrument startup.
See Chapter 17.1.1, "Logon", on page 1023 for restrictions of the standard user and
how to change the auto-logon.
"User autolo-
gon"
Auto-logon as standard user with limited access. Enter the "User
name": NormalUser and the "Password" of the standard user.
"Admin autolo-
gon"
Auto-logon with unrestricted access to the instrument and network.
The setting is only available for administrators. Enter the "User
name": Instrumen and the administrator's "Password" to enable the
auto-logon.
"None"
No auto-logon, user name and password are requested at instrument
startup.
Language
Selects the language in which the dialog boxes, result boxes and other screen informa-
tion is displayed.
Select setup for firmware update
Your instrument is delivered with the latest firmware version. Firmware updates are
provided on the internet at:
www.rohde-schwarz.com/firmware/rte.
The "Release Notes" describe the improvements and modifications of all firmware ver-
sions. They also explain how to update the firmware. They are available along with the
firmware on the same web page.
Only users with administrator rights can fulfill this task.
"Load"
Loads the specified file.
"Open"
Opens a file selection dialog box and loads the selected file.
System setup
To Next Page
Loading...
