Remote control commands
R&S
®
RTE
1423User Manual 1326.1032.02 ─ 20
Example:
BUS1:NEWList 'C:\Protocols\CAN.csv'
BUS1:SYMBols ON
Usage: Setting only
BUS<m>:SYMBols <UseTranslation>
Activates the lable list to be used for decoding.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<UseTranslation> ON | OFF
*RST: OFF
Usage: Asynchronous command
BUS<m>:ZCOupling <ZoomCoupling>
If enabled, the protocol decode zoom and result table are synchronized.
Suffix:
<m>
.
1..4
Parameters:
<ZoomCoupling> ON | OFF
*RST: OFF
DISPlay:RESultboxes:DEPosition <DecodePosition>
Defines the position of the protocol decode result table on the screen.
Parameters:
<DecodePosition> PREV | FLOA | DOCK
PREV
Preview: result icon on the sidebar.
FLOA
Floating result box in front of the diagrams.
DOCK
Docked: fixed tab below the diagrams.
*RST: DOCK
Usage: Asynchronous command
Protocols
To Next Page
Loading...
