Remote control commands
R&S
®
RTE
1589User Manual 1326.1032.02 ─ 20
SEARch:RESult:FLXRay:FRAMe<m>:FCSTate? <SearchName>
Returns the status of the frame checksum.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<ChecksumState> OK | STERror | SPERror | PRERror | UVAL | INSufficient
STERror: StarT ERror, incorrect start bit
SPERror: StoP ERror, incorrect stop bit
PRERror:PaRity ERror, incorrect parity bit.
UVAL: unexpected value
*RST: OK
Usage: Query only
SEARch:RESult:FLXRay:FRAMe<m>:FCValue? <SearchName>
Returns the value of the frame checksum.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<ChecksumValue> Range: 0 to 16777215
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:FLXRay:FRAMe<m>:FLAGs? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Flags> Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
Protocols