Rohde & Schwarz RTE - Page 1620

Remote control commands
R&S
®
RTE
1620User Manual 1326.1032.02 ─ 20
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MILStd:WORD<n>:DATA?
Return the data bytes of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<Data> 16-bit data of the specified word as a 2-byte bit pattern (B1, B2).
The first byte B1 is the most significant byte.
Example:
BUS:MILStd:WORD4:DATA?
<-- #H08,#H49
Usage: Query only
BUS<m>:MILStd:WORD<n>:INFO?
Returns the info value for the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<FrameInfo> Range: 0 to 2047
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MILStd:WORD<n>:RTADdress?
Returns the RT address for the selected word.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols