This manual describes the following R&S
®
RTE models with firmware version 4.80:
●
R&S
®
RTE1022: 200 MHz, 2 channels (1326.2000K22 and 1317.2500K22)
●
R&S
®
RTE1024: 200 MHz, 4 channels (1326.2000K24 and 1317.2500K24)
●
R&S
®
RTE1032: 350 MHz, 2 channels (1326.2000K32 and 1317.2500K32)
●
R&S
®
RTE1034: 350 MHz, 4 channels (1326.2000K34 and 1317.2500K34)
●
R&S
®
RTE1052: 500 MHz, 2 channels (1326.2000K52 and 1317.2500K52)
●
R&S
®
RTE1054: 500 MHz, 4 channels (1326.2000K54 and 1317.2500K54)
●
R&S
®
RTE1102: 1 GHz, 2 channels (1326.2000K62 and 1317.2500K02)
●
R&S
®
RTE1104: 1 GHz, 4 channels (1326.2000K64 and 1317.2500K04)
●
R&S
®
RTE1152: 1,5 GHz, 2 channels (1326.2000K72)
●
R&S
®
RTE1154: 1,5 GHz, 4 channels (1326.2000K74)
●
R&S
®
RTE1202: 2 GHz, 2 channels (1326.2000K82)
●
R&S
®
RTE1204: 2 GHz, 4 channels (1326.2000K84)
© 2021 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1326.1032.02 | Version 20 | R&S
®
RTE
Throughout this manual, products from Rohde & Schwarz are indicated without the
®
symbol, e.g. R&S
®
RTE is indicated as
R&S RTE.
To Next Page
Loading...
