Data and file management
R&S
®
RTE
512User Manual 1326.1032.02 ─ 20
Path
Tap the path elements to change the current folder. The default folder is defined in
Default path for all file operations.
You can save the data in a local folder on the instrument, to an external storage device
(usually a USB flash drive), or to a folder on a connected network drive. The path list
provides all available drives and folders.
On the left, shortcut icons provide access to often used folders.
Toolbar
The toolbar on the top provides various functions for file management.
File Name
The file name to be loaded or stored to. Double-tap the file name, or tap the keyboard
icon to enter the file name using the online keyboard.
The default file name for new files is defined in the "Autonaming" tab, see Chap-
ter 12.3, "Autonaming", on page 498.
File Type
The file extension of the file to be loaded or stored to.
Save, Select
Selects the specified file for the open or save operation and closes the dialog box.
Cancel
Closes the dialog box without selecting a file.
File selection dialog
To Next Page
Loading...
