Rohde & Schwarz RTE - Page 610

Protocol analysis
R&S
®
RTE
610User Manual 1326.1032.02 ─ 20
●
Encoding to signal mapping
Example of a LIN LDF file
LIN_description_file;
LIN_protocol_version = "2.0";
LIN_language_version = "2.0";
LIN_speed = 19.2 kbps;
Nodes {
Master: Master1, 10 ms, 0.1 ms;
Slaves: Slave_Motor, Slave_Sensor;
}
Signals {
Sensor1:1,0x0,Slave_Sensor, Master1;
Temperature1:12,0,Slave_Sensor, Master1;
}
Frames {
Sensor_Frame: {Error,30;
Temperature, 20;
Status, 0;}
Master_Frame: {Error,15;
Speed, 10;}
}
Schedule_tables {
Sensor_Frame delay 10.000 ms;
Master_Frame delay 15.000 ms;
}
Signal_encoding_types {
Speed {logical_value, 0, "Motor_off";
logical_value, 1, "Speed1";
logical_value, 2, "Speed2";
logical_value, 3, "Speed3";
}
}
Signal_representation {
Speed1_encoding:Speed1
Temperature1_encoding:Temperature1
}
LIN (option R&S
RTE-K3)