Protocol analysis
R&S
®
RTE
650User Manual 1326.1032.02 ─ 20
Figure 13-40: Decoded TDM signal with 4 channels, frame offset 16 bit, channel offset 4 bit, word
length 8 bit and inverted FSYNC and SDATA polarity
Table 13-9: Content of the "Decode results" table
Column Description
Frame Start Time of the frame start
Frame State Overall state of the frame.
"Insuffcient waveform length" indicates that the frame is not completely contained
in the acquisition.
TDM<x> Value Data value of the TDM channel
Data format
You can select various data formats for the values displayed in the decode table and in
the combs of the decoded signal.
Remote command:
●
BUS<m>:FORMat on page 1422
Export of decode results
1. In the protocol decode table, press "Export".
The "Numeric Results" dialog opens.
For details, see Chapter 12.2.4, "Numeric Results", on page 492.
Audio signals (option R&S
RTE-K5)
To Next Page
Loading...
