Protocol analysis
R&S
®
RTE
672User Manual 1326.1032.02 ─ 20
Figure 13-47: Decoded MIL-1553 signal with applied label list and results table. The last frame con-
tains an error.
Table 13-10: Content of the decode result table
Column Description
State Overall state of the word
Start Time of word start in relation to the trigger point
Stop Time of word stop in relation to the trigger point
Type Word type
RTA Remote terminal address
Info The hexadecimal value of the 9th to 1th bit of a command/status word
Label Symbolic label name defined in the label list
Data The values of the data bytes
Data format
You can select various data formats for the values displayed in the decode table and in
the combs of the decoded signal.
Remote command:
●
BUS<m>:FORMat on page 1422
MIL-1553 (option R&S
RTE-K6)
To Next Page
Loading...
