Protocol analysis
R&S
®
RTE
758User Manual 1326.1032.02 ─ 20
Figure 13-68: SENT decode results of an enhanced serial message
Table 13-15: Content of the decode result table
Column Description
State Overall state of the frame
Start Time of frame start in relation to the trigger point
Type Frame type
Sync Duration Time of the synchronization pulse
Status [bin] Status value
ID Type Identifier type
ID Value [hex] Identifier value
Data Nibbles Value of the data nibble
Symbolic Data Symbolic data value
Label Symbolic label name defined in the label list
CRC [hex] CRC sequence value
Pause Pulse [Ticks] Number of the pulse pause clock
Bit rate Value of the bit rate
Zooming on decoded results
The zoom functions allow you to analyze the decode results in more detail. If "Zoom
coupling" is enabled, the decode zoom and result table are synchronized; if you select
a row in the result table, this result is shown in the decode zoom.
SENT (option R&S
RTE-K10)
To Next Page
Loading...
