Page I-3
Index
INTER-TEL
®
AXXESS
®
MANUAL VERSION 11.0 – May 2008
INDEX
A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W - X
Appendix E — Upgradingto 9.0 E-1
Appendix F – Network Topology F-1
Application and Channel Statistics 6-418
Application Attributes 6-358
Application-Related Information 6-353
Applications 6-356
Area Code Programming (U.S. Only) 6-290
Area Codes 6-280
allowed/denied 5-107, 6-281
flags 6-280
home/local 5-105
numbering plan 5-104
patterns 6-320
programming 6-290
used as office codes 5-104
Area Flags 6-280
Area Flags (U.S. Only) 6-280
Area/Office Code
numbering plan 5-104
numbering plans and local area codes 5-104
Area/Office Code Numbering Plans and Local Area Codes (U.S. Only)
5-104
ARS 1-10
dial rules, route groups, and facility groups 6-291
facility group report 6-339
on a network 5-102
route group report 6-339
ARS Dial Rules, Route Groups, And Facility Groups 6-291
ARS Dial Rules, Route Groups, and Facility Groups 6-291
ARS on a Network 5-102
ARS-Only Class Of Service 5-107, 5-108, 6-281, 6-282
Assemble the Necessary Tools and Supplies 3-11
Assemble the Optional Equipment 3-14
Assembling
Main Distribution Frame (MDF) backboard 3-22
necessary tools and supplies 3-11
optional equipment 3-14
Assembling the Main Distribution Frame (MDF) Backboard 3-22
Assigning the Modem to a DSS/BLF Button 5-300
Associate Display Phone
headset 3-188
PCDPM cable connection 3-198
PCDPM installation 3-191
phone dimensions 2-73
phone self-test matrix 3-182
Associate Display Phones 2-111
Associated Devices and References 5-31, 6-200
Associated Extensions 6-196, 6-203
Associated Gateway 6-253
Associated Keyset 6-157
Associated Mailboxes 6-33
Associated Outside Number 6-205
ASX-200BX 2-10, 3-165, 3-168, 7-11
Asynchronous Transfer Mode (ATM) 1-5
ATM 1-5
adapter card C-7
connectors 2-27
interfaces 2-9
ATM Adapter Card C-7
ATM Switch 2-9
configurations 2-9
installation 3-163
ATM Switch Installation 3-163
ATM Switch LEDs 7-11
ATM Switches 8-3
ATM-Based System Configuration 2-13
Attach Three or Four Units Together, if Necessary 3-76, 3-84
Attach Two Units Together, if Necessary 3-75, 3-84
Attached Device 6-205
bit rate 6-205
Attached Device Bit Rate 6-205
Attaching a Headset to a Digital Phone 3-188
Attaching a Headset to a Model 8520 Or 8560 Phone 3-188
Attachment Format for Inbound Faxes 6-430
Attachment Format for Mobile Devices 6-384
Attendant 6-366
Attendant Console 1-22, 2-83, 5-147
Attendant Console Features 1-30
Attendant Features 1-29
Attendant Recall 5-28
Attendant Stations 5-27
Attendants 5-27, 6-303
DSS/BLF Units 5-27
extension number 5-25
features 1-29
forwarding to 5-231
hunt groups as 5-27
primary 5-28, 5-29, 6-315
programming 5-278, 6-203, 6-209
recall 5-28
serving other attendants 5-28
transfer timer 5-28
Audible Message Indication for SL Sets 2-40, 6-258
Audio Connection Status 5-167
Audio Connections 5-167
Audio Connections to IP Devices 5-168
Audio Diagnostics 5-318, 6-210, 6-304
Audio Direction 5-319
Audio for Calls
camped onto this device 4-6, 6-170, 6-192, 6-206, 6-301, 6-
367
holding for this device 4-6, 6-206, 6-367
ringing this device 4-6, 6-168, 6-206, 6-367
Audio for Calls Camped onto this Device 6-168, 6-192, 6-197, 6-206,
6-234
Audio for Calls Holding for this Device 6-197, 6-206
Audio for Calls Ringing this Device 6-168, 6-197, 6-206
Audio for Camped-On Announcement Calls 6-168
Audio Frames Per IP Packet 2-98, 6-185
Audio Interface Card 2-90
Audio Interface Card (AIC) 2-90
illustration 3-218
installation 3-211
PCM connection 2-27, 2-67, D-13
Audio On Hold For Transfer Announcement 6-235
Audio on Hold for Transfer Announcement 6-235
Audio On Transfer To Hold 6-235
Audio on Transfer to Hold 6-235
Audio On Transfer To Ring 6-235
To Next Page
Loading...
