Rohde & Schwarz RTE - Page 1004

Power analysis (option R&S RTE-K31)
R&S
®
RTE
1004User Manual 1326.1032.02 ─ 20
Switching frequency
Enables the measurements of the switching frequency. If disabled you can enter the
value of the switching frequency.
Remote command:
POWer:SWITching:SWIFrequency on page 1968
POWer:SWITching:SWIT on page 1969
Turn on
Enables the measurements during the turn on period.
Remote command:
POWer:SWITching:TON on page 1969
Conduction
Enables the measurements during the conduction period.
Remote command:
POWer:SWITching:COND on page 1969
Turn off
Enables the measurements during the turn off period.
Remote command:
POWer:SWITching:TOFF on page 1969
Non conduction
Enables the measurements during the non conduction period.
Remote command:
POWer:SWITching:NCON on page 1969
Total
Enables the measurements of the total period
Remote command:
POWer:SWITching:TOTal on page 1969
Power path