Rohde & Schwarz RTE - Page 1324

Remote control commands
R&S
®
RTE
1324User Manual 1326.1032.02 ─ 20
Suffix:
<m>
.
1..8
math waveform
Parameters:
<RelativeStop> Range: 0 to 100
Increment: 0.1
*RST: 100
Default unit: %
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:GATE:ZCOupling
<ZoomCoupling>
If enabled, the gate area is defined identically to the zoom area for the zoom diagram.
Suffix:
<m>
.
1..8
math waveform
Parameters:
<ZoomCoupling> ON | OFF
*RST: OFF
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:GATE[:STATe] <State>
Enables FFT gating.
Suffix:
<m>
.
1..8
math waveform
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:MAGNitude:LEVel <VerticalMax>
Defines the reference level for dB scaling.
Suffix:
<m>
.
1..8
Math waveform
Parameters:
<VerticalMax> Range: -1E+15 to 1E+15
Increment: 0.01
*RST: 0
Default unit: div
Spectrum analysis