Remote control commands
R&S
®
RTE
1415User Manual 1326.1032.02 ─ 20
HCOPy:WBKG <WhiteBackground>
Inverts the background color. So you can print waveforms with normal waveform col-
lors on white background.
If both HCOPy:WBKG and HCOPy:DEVice<m>:INVerse are ON, the instrument
inverts the background twice, and it appears black.
See also: "White background" on page 504.
Parameters:
<WhiteBackground> ON | OFF
*RST: OFF
HCOPy:CMAP<m>:DEFault
<PrintColorSet>
Defines the default color set for printing of the display image.
To set the output to printer, use HCOPy:DESTination<1..2> with parameter
'SYST:COMM:PRIN'.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<PrintColorSet> DEF1 | DEF4
DEF1
Current screen colors with white background and black grid.
DEF4
Current screen colors without any changes (black background).
*RST: DEF1
HCOPy:SSD <ShowSetupDialog>
Enables or disables the display of open dialog boxes in screenshots. Use this com-
mand if you want to document settings in screenshots.
Parameters:
<ShowSetupDialog> ON | OFF
*RST: OFF
Firmware/software: FW 3.20
HCOPy:ISBA IncludeSignalBar
If the value is set to OFF, the screenshot shows only the diagram area, without the sig-
nal bar.
Data management
To Next Page
Loading...
