Remote control commands
R&S
®
RTE
1626User Manual 1326.1032.02 ─ 20
SEARch:TRIGger:MILStd:CMD:SCONdition <SearchName>,<SubaddrOperator>
SEARch:TRIGger:MILStd:CMD:SCONdition? <SearchName>
SEARch:TRIGger:MILStd:DATA:DCONdition <SearchName>,<DataOperator>
SEARch:TRIGger:MILStd:DATA:DCONdition? <SearchName>
Sets the operator for the corresponding search:
●
CDST:ICON - specific info for the 9th to 19th bit of a command or status word.
●
CMD:CCON - specific data word count or mode code pattern in a command word
●
CMD:SCON - specific subaddress/mode pattern in a command word
●
DATA:DCON - data pattern in a data word
Parameters:
<DataOperator> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
*RST: EQUal
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MILStd:CDST:IMIN <SearchName>,<InfoPatternMin>
SEARch:TRIGger:MILStd:CDST:IMIN? <SearchName>
SEARch:TRIGger:MILStd:CMD:CMIN <SearchName>,<WordCntPattMin>
SEARch:TRIGger:MILStd:CMD:CMIN? <SearchName>
SEARch:TRIGger:MILStd:CMD:SMIN <SearchName>,<SubaddrPattMin>
SEARch:TRIGger:MILStd:CMD:SMIN? <SearchName>
SEARch:TRIGger:MILStd:DATA:DMIN <SearchName>,<DataPatternMin>
SEARch:TRIGger:MILStd:DATA:DMIN? <SearchName>
Sets the pattern or the start value of a pattern range for the corresponding search:
●
CDST:IMIN - specific info for the 9th to 19th bit of a command or status word.
●
CMD:CMIN - specific data word count or mode code pattern in a command word
●
CMD:SMIN - specific subaddress/mode pattern in a command word
●
DATA:DMIN - data pattern in a data word
Parameters:
<DataPatternMin>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MILStd:CDST:IMAX <SearchName>,<InfoPatternMax>
SEARch:TRIGger:MILStd:CDST:IMAX? <SearchName>
SEARch:TRIGger:MILStd:CMD:CMAX <SearchName>,<WordCntPattMax>
SEARch:TRIGger:MILStd:CMD:CMAX? <SearchName>
Protocols