Rohde & Schwarz RTE - Page 1644

Remote control commands
R&S
®
RTE
1644User Manual 1326.1032.02 ─ 20
Parameters:
<DataMin> Numeric or string pattern, see Chapter 18.4.6, "Bit pattern
parameter", on page 1076. The string parameter accepts the bit
value X (don't care).
Parameters for setting and query:
<SearchName> String parameter
SEARch:TRIGger:ARINc:LABel:MAX <SearchName>,<LabelMax>
SEARch:TRIGger:ARINc:LABel:MAX? <SearchName>
SEARch:TRIGger:ARINc:DATA:MAX <SearchName>,<DataMax>
SEARch:TRIGger:ARINc:DATA:MAX? <SearchName>
Set the end value of a label or data pattern if the condition is set to INRange or
OORange.
Parameters:
<DataMax> Numeric or string pattern, see SEARch:TRIGger:ARINc:
LABel:MIN
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:SDI <SearchName>,<SDI>
SEARch:TRIGger:ARINc:SDI? <SearchName>
Sets the source/destination identifier (SDI) bits.
Parameters:
<SDI>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:SSM <SearchName>,<SSM>
SEARch:TRIGger:ARINc:SSM? <SearchName>
Sets the sign/status matrix (SSM) bits.
Parameters:
<SSM>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:ARINc:ERRor:CODing <SearchName>,<CodingError>
SEARch:TRIGger:ARINc:ERRor:CODing? <SearchName>
Enables the search for coding errors.
Protocols