Rohde & Schwarz RTE - Page 1716

Remote control commands
R&S
®
RTE
1716User Manual 1326.1032.02 ─ 20
Return values:
<State> OK | UNDF
UNDF: Undefined
*RST: OK
Usage: Query only
BUS<m>:SENT:FRAMe<n>:NIBBle<o>:VALue?
Returns the value of the specified nibble.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the nibble number.
Return values:
<Value> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 15
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:SENT:FRAMe<n>:PAPTicks?
Returns the number of the pulse pause clock ticks.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<PausePulseTicks> Range: 12 to 768
Increment: 1
*RST: 12
Usage: Query only
BUS<m>:SENT:FRAMe<n>:SCOM?
Returns the value of the status/communication pulse.
Protocols