Rohde & Schwarz RTE - Page 1829

Remote control commands
R&S
®
RTE
1829User Manual 1326.1032.02 ─ 20
Return values:
<PID> RES | OUT | ACK | DATA0 | DATa0 | PING | SOF | NYET |
DATA2 | DATa2 | SPLIT | SPLit | IN | NAK | DATA1 | DATa1 |
PRE | SETUP | SETup | STALL | STALl | MDATA | MDATa | UNK
For a description of the return values, see BUS<m>:USB:
PACKet<n>:PID? on page 1806.
*RST: RES
Usage: Query only
SEARch:RESult:USB:PACKet<m>:PORT? <SearchName>
Returns the port number for the selected packet number within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Port> Range: 0 to 127
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:USB:PACKet<m>:SC? <SearchName>
Returns the Start- / Complete-split transaction (SSPLIT / CSPLIT) flag bits for the
selected packet number within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<SC>
Usage: Query only
SEARch:RESult:USB:PACKet<m>:SEU? <SearchName>
Returns the SEU values for the selected packet number within the search result.
For SEU, see "SEU" on page 834.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Protocols