Rohde & Schwarz RTE - Page 1834

Remote control commands
R&S
®
RTE
1834User Manual 1326.1032.02 ─ 20
Defines the parameter by using the index <m> for the frame number and <n> for
the field number. For an overview, see Overview of frame and field numbers for
USBPD.
●
TRIGger:USBPD:DMIN "Control", "MsgID", 01100
Defines the parameter by using the frame and field name.
Table 18-12 gives an overview of the available frame and field numbers. Those num-
bers follow the GUI numbers.
Table 18-12: Overview of frame and field numbers for USBPD
Frame
number
Frame name Field
number
Field name
1 Test Frame - -
2 Reset - -
3 Control frame 1 Extended
2 NumDataObjs
3 MsgID
4 PwrRole/Plug
5 Rev
6 DataRole
7 MsgType
4 Data Frame 1 Extended
2 NumDataObjs
3 MsgID
4 PwrRole/Plug
5 Rev
6 DataRole
7 MsgType
8 DATA
5 Extended 1 Extended
2 NumDataObjs
3 MsgID
4 PwrRole/Plug
5 Rev
6 DataRole
7 MsgType
8 Chunked
9 Chunk Num
Protocols