Rohde & Schwarz RTE - Page 1845

Remote control commands
R&S
®
RTE
1845User Manual 1326.1032.02 ─ 20
●
SEARch:TRIGger:USBPD:DMIN "Control", "MsgID", 01100
Defines the parameter by using the frame and field name.
SEARch:TRIGger:USBPd:ERENable............................................................................. 1845
SEARch:TRIGger:USBPd:ERRor<m>:ENABle................................................................1845
SEARch:TRIGger:USBPd:FRENable............................................................................. 1846
SEARch:TRIGger:USBPd:FRAMe<m>:ENABle...............................................................1846
SEARch:TRIGger:USBPd:FIENable...............................................................................1846
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:ENABle..................................................1846
SEARch:TRIGger:USBPd:BIT....................................................................................... 1847
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:BIT........................................................ 1847
SEARch:TRIGger:USBPd:DMAX...................................................................................1847
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:DMAX....................................................1847
SEARch:TRIGger:USBPd:DMIN....................................................................................1848
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:DMIN.....................................................1848
SEARch:TRIGger:USBPd:DOPerator.............................................................................1848
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:DOPerator..............................................1848
SEARch:TRIGger:USBPd:IMAX.................................................................................... 1849
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMAX..................................................... 1849
SEARch:TRIGger:USBPd:IMIN..................................................................................... 1849
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMIN...................................................... 1849
SEARch:TRIGger:USBPd:IOPerator.............................................................................. 1849
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IOPerator............................................... 1849
SEARch:TRIGger:USBPd:ERENable <SearchName>,<ErrorName>, <Enabler>
SEARch:TRIGger:USBPd:ERRor<m>:ENABle <SearchName>,<Enable>
SEARch:TRIGger:USBPd:ERRor<m>:ENABle? <SearchName>
Enables or disables the checking condition for searching a specific error in the selected
field of the selected frame.
Suffix:
<m>
.
*
Specifies the error number.
Parameters:
<Enable> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Example:
SEARch:TRIGger:USBPd:ERRor1:ENABle ON
Enables searching for CRC Error.
SEARch:TRIGger:USBPd:ERENable "Length Error",ON
Enables searching for Length Error.
Protocols