Measurements
R&S
®
RTE
368User Manual 1326.1032.02 ─ 20
"Absolute"
The harmonics/peaks are shown in absolute value, dBm.
"Relative"
The level of the carrier is shown in absolute value dBm. The values
the harmonics/peaks are shown relatively to the carrier in dBc.
Remote command:
MEASurement<m>:SPECtrum:RESult<n>:MODE on page 1273
Result labels
For peak lists only, requires option R&S RTE-K18: Use labels to describe the detected
peaks in the spectrum diagram.
You can configure what is displayed in the labels, and how they look like.
Automatic measurements
To Next Page
Loading...
