Mask testing
R&S
®
RTE
427User Manual 1326.1032.02 ─ 20
Alternatively, you can set the corner points on the touch screen and adjust the values
in the "Mask Definition" tab.
To save the mask, select the "Test Definition" tab and save the mask test.
Settings overview:
Make sure that the correct "Mask Test" tab is selected on the left side before you enter
the settings.
Mask segments
Defines the number and state of mask segments for the selected mask test. Here you
can:
●
Insert a new segment before the selected segment.
Mask test settings
To Next Page
Loading...
